Metal Polishing Compound Support
MULTI-LANGUAGE
HOW TO USE
SAFETY DATA SHEET
How To Use Metal Polishing Compound
STEP 1: Cleaning
Clean the treated area thoroughly.
STEP 2: Apply
Apply to a soft applicator pad or a cloth.
STEP 3: Start Polishing
Use steady circular motions. Apply light to moderate pressure.
STEP 4: Final Inspection
Clean and inspect, repeat process if necessary.
Metal Polishing Tips
✅ Always start with a clean, dry surface to avoid trapping dirt or debris.
✅ Use a soft polishing pad or cloth suitable for metal surfaces.
✅ Begin with low speed (if using a polishing machine) and increase gradually.
✅ Polish small sections at a time for consistent results.
✅ Wipe away excess compound regularly to monitor progress.
✅ Avoid pressing too hard to prevent swirl marks or streaks.
✅ Finish by buffing with a clean microfiber cloth for maximum shine.
Frequently Asked Questions
What metals can I use this compound on?
It is suitable for stainless steel, aluminum, brass, copper, chrome, and other common metals.
Can this compound remove deep scratches?
It is designed to remove light scratches, oxidation, rust and tarnish. Deep scratches may require sanding before polishing.
Can I use the compound by hand or with a machine?
Both methods work. Hand application is effective for small areas, while a polishing machine or a drill gives faster, more consistent results on larger surfaces.
What pads should I use with this compound?
For best results, use a soft foam or felt polishing pad on stainless steel and delicate metals, and a firmer foam or wool pad for tougher surfaces.
What finish does this compound achieve?
The compound delivers a high-gloss, restoring metal surfaces to a polished, mirror-like appearance rather than a matte effect.
Often Bought Together
GP-PRO Felt Polishing Pad / 3'' 75mm
Pro-Line Polishing Foam / 3" 75mm